Public ranges checked November 2026
The short answer
Permanent Christmas lights are priced by the foot of roofline, plus the controller that runs them. Across the public sources below, installed prices run in the low tens of dollars per foot, and a typical home lands in the low thousands for the street-facing sides.
Those are national ranges, not a quote. The exact figure for your home depends on the things listed further down, and a Duskwise proposal gives it to you after your roofline is measured.
Public price ranges, with sources
These are the figures the sources themselves publish. We quote them so you have a frame of reference before anyone visits your home.
- JellyFish Lighting, pricing page: $25 to $35 per foot, plus a controller. The published rate for the installs its own locations do. It notes that installation difficulty, location and time of year change the price. Pricing page
- JellyFish Lighting, cost article: $3,000 to $6,000 for the street-facing sides. Its own estimate for the front and the visible sides of a typical home, at the per-foot rate above. Cost article
- HomeGuide, national cost survey: $20 to $40 per foot, or $2,000 to $8,000 for a home. An independent survey across brands and installers, for about 100 to 200 feet of roofline. HomeGuide
What drives the price
Two homes on the same street can land at different figures. These are the things that move it.
- Feet of roofline. The biggest factor. The front alone, the front and the visible sides, or every eave and gable of the house.
- Stories and height. A second story and tall gables take more time and equipment than a single-story ranch.
- Soffit and fascia. Aluminum, vinyl, wood or open rafter tails each mount differently, and trim that needs repair comes first.
- Light spacing. Lights sit in the track at 6, 9 or 16 inch spacing. Closer spacing reads as one line of light and uses more lights per foot.
- Controllers and zones. Longer runs and separate zones (front and back, house and garage) can call for more than one controller.
- Power. Everything plugs in. A home with no outdoor outlet near the roofline needs a licensed electrician to add one.
- Landscape and sound add-ons. Uplights, path lights, outdoor speakers and the wall panel are priced on their own, so you can start with the roofline alone.
How your roofline is measured
The single biggest factor is feet of roofline, so it is measured, not guessed. We use your address to measure your roofline from above before we visit, then check it against the photos you send through your private photo link.
If the check agrees with the measurement to within 5 percent, your proposal can be approved and paid online straight away. If they differ by more than 5 percent, or the check is not confident, a member of our team visits to verify the measurements first, and your proposal is updated to the verified figures before you approve it or pay.
Measuring your roofline is free, whether we measure it from above before we visit or verify it on site.
Starting with part of the house
You do not have to light every eave at once. Many homeowners start with the front and the visible sides, then add the back, a detached garage, landscape lighting or sound later. Every project is planned so later additions join the same schedule without redoing anything.
How to compare quotes
Ask every installer the same questions, so the figures line up.
- How many feet of roofline is the price for, and which sides?
- What light spacing is quoted, and what does the warranty cover, in writing?
- Is the controller included, and how many zones does it run?
- Is a new outlet included if one is needed, and who installs it?
- Was the roofline measured, or estimated from the street?
How a Duskwise proposal is priced
We measure your roofline from above and check it against your photos. Your proposal shows your own house lit, every zone and fixture placed, with one fixed investment. If the measurements differ by more than 5 percent, we verify on site before you pay.
We do not publish our own prices here, because no two rooflines are the same. The ranges above are public; the figure for your home is in your proposal.
